3.7v 200 mAh Rechargeable Lithium Battery LiPo cells 402030 200mAh for Arduino

Description

Electrical characteristics：
1. Standard Charging method ：0.5C （constant current）charge to 4.2V,then CV(constant voltage 4.2V)charge till charge current decline to ≤0.05C
2. Rated Capacity ： The capacity means the discharge capacity of the cell, which is measured with discharge current of 0.2C with 3.0V cut-off voltage after standard charge.
3. Charging time ：Standard Charging：3.0 hours(Ref.) ，Rapid charge： 2.0 hours(Ref.)
4. Max. charge current ：1.0C
Max. discharge current ：1.0C
Discharge cut-off voltage ：3.0V
5. Operating temperature ：Charging： -20℃~60℃ Discharging：-20℃~60℃
6. Storage temperature ： -10℃~ +45℃
7. Cycle life: 400 cycles,Stable performance with 100% in house testing
Test condition：
Charge:0.5C to 4.2V
Discharge:0.2C to 3.0V
70% or more of 1st cycle capacity at 0.2C discharge of Operation
Self-discharge ：Residual capacity >90%
After the standard charging, storied the cells under the condition for 30 days, then measured the capacity with 0.2C till 3.0V
Temperature characteristics：
-20℃: ≥65%
23℃: 100%
60℃: ≥96%
---- According to item at 23±5℃.
---- Capacity comparison at each temperature, measured with constant discharge current 0.2C with 3.0V cut-off. Percentage as an index of the capacity compared with 100% at 23℃
Mechanical characteristics:
----- Vibration Test : No leakage / No fire
After standard charging, fixed the cell to vibration table and subjected to vibration cycling that the frequency is to be varied at the rate of 1Hz per minute between 10Hz an 55Hz,the excursion of the vibration is 1.6mm.The cell shall be vibrated for 30 minutes per axis of XYZ axes.
----- Drop Test : No fire/ no leakage.
The cell is to be dropped from a height of meter twice onto concrete ground.
Description:
- Model : 402030
- Cell Weight： Approx：5 g
- Cell Dimension ：
Thickness(± 0.2)xWidth(± 1)xLength(± 1)(mm)
4 mm ×20 mm × 30 mm
0.15 inch × 0.78 inch × 1.18 inch
- Initial impedance ： ≤110 mΩ
Internal resistance measured at AC 1KHz after 50% charge
- Nominal Capacity : 200mAh @ 0.2C Discharge.
- Perfect for small Arduino projects. Fit for Remote controller,IPTV Set top box remote controller,LED lighting,Underwater lighting system,Bluetooth device,MP3/MP4 player,safety lamp,GPS,Mobile phone,E-book,Power bank,Portable DVD, Walkie talkie,Notebook,Tablet PC,PDA,Game player,Pos machine, Consumer electronics device, Medical Devices ,Flash lighting garden lighting, Toys ,Project Design etc.
Package Included:
1 x 3.7v 200 mAh Rechargeable Lithium Battery LiPo cells 402030
Note
: This battery is sold without any connectors.
No returns on Batteries, please make sure the size of the battery is correct for your project. We don't provide technical assistance, please make sure that you are familiar with the product before purchasing.